All times are UTC - 6 hours



Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: 14 Dec 2009, 10:10 

Posts: 17
This thread is an attempt to consolidate questions related to the cutters offense described at http://www.breakthroughbasketball.com/offense/cutters.html.

Two other threads include questions on this offense
* viewtopic.php?f=48&t=158 (Making the first pass)
* viewtopic.php?f=48&t=78 (Easy offense)

Now to add to the questions!

We've been doing 5 on 0 (dummy offense) for 5-10 minutes a practice and they seem to get it pretty well except the player filling the cutters spot will usually leave too early, so that he's standing there by the time the player with the ball looks back. Any drill suggestions for this?

Also, I'm not sure who fills the cutter's spot if the player filling the spot back cuts. Let's say the point passes to the rt wing and basket cuts. The left wing starts to fill the point but back cuts instead. Should the player with the ball (on the right wing) dribble to the point to balance the floor?

Finally do you have any suggestions for building up to 5 on 5 (i.e., the game). We have 8 players on our team and I tried 4 on 4 at practice, but of course they mostly forgot what they were supposed to do and dribbled around (finally free to play!). Should I start with 2 on 2, 5 on 3, ...?


 Profile  
 
PostPosted: 14 Dec 2009, 10:18 

Posts: 17
Greg,

While the concepts behind the 5 Out Motion offense are simple, it has taken me a couple of weeks to get my boys to run it. I was beginning to think it was hopeless. And then in our last game on Sunday--they actually ran it pretty good. Still a lot of room for improvement in the patience area. There is a definite tendency to try to force the pass to the 1st person that cuts.

But my advice would be to just stick with it. If you have 8 players, I think I would put 5 on offense and the other 3 players (plus 2 coaches/parents) on defense. Tell the defense not to play too hard at first, and challenge the offense to pass several times before taking a shot.

_________________
CoachDoug

2010-11 3rd/4th/5th Grade Boys - CYO - Novice 1 Level
2009-10 5th/6th Grade Boys - CYO - Intermediate 2 Level
2008-09 4th/5th Grade Boys - CYO - Novice 1 Level


 Profile  
 
PostPosted: 14 Dec 2009, 10:34 
Site Admin
User avatar

Posts: 337
Location: Winter Garden, FL (Orlando suburb)
Great idea, Greg.

To prevent players from moving too early, Rule 3 - Cut Only When You Pass The Ball or when the player with the ball is looking at you. That means that the offensive player getting ready to fill the top spot should not cut until the passer is looking at them. This should be the same time that the initial cutter is starting to clear the lane. When it comes to filling the spot, I think it's better to be late than early. Similar concept when it comes to running off of screens.

For floor balance, the player could dribble to the top of the key for floor balance, but I don't think that is needed unless you need to dribble to prevent a 5-second call. The player who orginally started at the baseline should be filling the spot at the top of the key. If there was not a 5-second call violation, the player with the ball could stand on the wing as the players on the left side of the court continuously rotate through and make basket cuts.

Another tip for the cutter filling the spot, I like them to cut to a spot a few feet inside of the 3-point line. I don't think I recommended that in the original article. That way, if the defense is overplaying, they can cut backdoor. If they are not overplaying, they can cut to the 3-point line area to get the ball.

I think 2 on 2 and 3 on 3 are great tools to teach offense concepts. You could play games like:
- After every pass, use a basket cut.
- Automatic turnover, if the player does not get into a triple threat position when catching the ball.
- After every pass, you have to screen away from the ball
- Ball screens only.
- No dribble.

You wouldn't want to do this all at once. Only introduce the new games as you teach the new concepts.

Be creative. I'm sure you could think of more games to teach concepts.

Remember, the cutters offense is just a beginning step with the youth players. Let them play and don't place too many rules on them, because they turn into robots running a pattern rather than reacting to the defense. Here are some more tips on running a youth motion offense: http://www.breakthroughbasketball.com/offense/motion-offense-youth-basketball.html

_________________
Joe Haefner
http://www.breakthroughbasketball.com/kc/


 Profile  
 
PostPosted: 14 Dec 2009, 11:15 

Posts: 17
Quote:
To prevent players from moving too early, Rule 3 - Cut Only When You Pass The Ball or when the player with the ball is looking at you. That means that the offensive player getting ready to fill the top spot should not cut until the passer is looking at them. This should be the same time that the initial cutter is starting to clear the lane. When it comes to filling the spot, I think it's better to be late than early. Similar concept when it comes to running off of screens.


Yeah, they're good on rules 1 and 2, but me just "saying" rule #3 hasn't made it happen yet. Only two practices though. Patience!

Quote:
Another tip for the cutter filling the spot, I like them to cut to a spot a few feet inside of the 3-point line. I don't think I recommended that in the original article. That way, if the defense is overplaying, they can cut backdoor. If they are not overplaying, they can cut to the 3-point line area to get the ball.


The kids actually figure this out on their own. I practiced them filling the point and choosing whether or not to back cut or not with a defender on them (I was passing from the wing). They loved to back cut (because they'd get to lay it up) and started to always cut that way even if they were filling the point, creating separation for the pass. It's fun to watch them figure it out on their own.

Quote:
I think 2 on 2 and 3 on 3 are great tools to teach offense concepts. You could play games like:
- After every pass, use a basket cut.
- Automatic turnover, if the player does not get into a triple threat position when catching the ball.
- After every pass, you have to screen away from the ball
- Ball screens only.
- No dribble.


Great ideas. I think we'll start with triple threat. They tend to turn their backs to the basket to avoid losing the ball instead of creating space by being a threat to dribble or shoot. A lot of them are used to playing one on one and backing in the defender.

Quote:
Remember, the cutters offense is just a beginning step with the youth players. Let them play and don't place too many rules on them, because they turn into robots running a pattern rather than reacting to the defense. Here are some more tips on running a youth motion offense: http://www.breakthroughbasketball.com/offense/motion-offense-youth-basketball.html


Understood! A quote I like from the distance running world is "I'm trying to get you to feel kung fu, not think it."

(PS: Sorry for the markup, but I can't figure out how to turn BBCode on. It says it's on by default in my profile, but when I post it says "Options: BBCode is OFF")


 Profile  
 
PostPosted: 14 Dec 2009, 11:24 
Site Admin
User avatar

Posts: 1280
I noticed some savvy users trying to use the quotes and BBcode. I think I enabled it for the entire forum. Let me know if it starts working now on other posts. Seemed to work on this one.

_________________
Jeff Haefner
http://www.BreakthroughBasketball.com


 Profile  
 
PostPosted: 09 Jan 2010, 12:44 

Posts: 17
First game against the zone. We hung in there the first half in were down only 7-8 with some good (man-to-man!) defense and rebounding. They passed the ball around and you'd recognize it as a motion if you saw it, which was great, but they didn't take the opportunities they had to drive, especially from the wing, which was open. I think I encouraged them to drive a little too much and lots of head down into the teeth of the zone leading to turnovers and points in the second half. We got crushed.

We've only had 4 practices (3 before break and one this week), so I didn't get as far as what to do against a zone. I'm planning to have them post up at the mid-post on each cut, but one thing I'm wondering about is what the passer does if somehow he makes that pass. Does he stay where he is as an outlet. I'm also wondering where the scoring comes from. I'm guessing the guy posting probably won't be able to turn and score. Should I teach them to look for the guy filling the point who should have an open lane?


 Profile  
 
PostPosted: 09 Jan 2010, 14:16 
Site Admin
User avatar

Posts: 1280
Greg,

I think you'll probably need to experiment to find out what works. It depends on the type of players you have, etc. If I remember right these were pretty young kids and that was why you wanted a simple offense?

When the ball is entered into the post, I would suggest the passer simply finds the open spot. That's it. If the ball gets entered inside you would hope to have a good chance for an inside shot or a kick out to an open outside shot.

I honestly did not have great success with cutters against zone. I think part of it was my lack of vision at that time. It ran that several years ago. I actually had another offense I used against zone and unfortunately we ran the zone offense a lot because we usually tore up the other teams M2M with the cutters offense. It would not take long for them to give up and just go to zone D. I was not very good at zone offense at the time.

You could also try maintaining your rules when the ball is entered in the post. The passer cuts to the basket. The player might be open or open things up for other players. Experiment and see what happens. And keep teaching those fundamentals. :)

_________________
Jeff Haefner
http://www.BreakthroughBasketball.com


 Profile  
 
PostPosted: 09 Jan 2010, 14:53 
User avatar

Posts: 3139
We ran an Open Post offense called Double Up for many years and had a lot of success with it. Its not on this site but you can find it on Coaches Clipboard.

Your kids need to know how to read the defense and make the proper cut ... and if things get messed up they only have to fill the one spot that is empty... yes it takes some practice but IF your kids can handle the ball, you can do very well with this.

See if you can get a couple of kids that are willing to come in and play some defense for you and the team... that will help the kids understand the offense better, regardless of what offense you are running.


 Profile  
 
PostPosted: 10 Jan 2010, 11:32 

Posts: 17
I'm debating whether to just modify the cutters with the cutter stopping at the mid-post or short corner or just going to a 4-out 1-in with basically the same rules, but the post guy going from mid-post to mid-post following the ball.

Don Kelbick talks about the power of the short corner position against a zone. I have to admit that I'm not getting it. What is it that a guy with the ball there can do that makes it so powerful? Is it that he's in a good position to score or to make a pass. If so, what pass?

Like I said, I'm thinking of going to a 4-out 1-in against the zone. We have a very tall team anyway, so maybe the 5-out wasn't the best idea anyway. (I was thinking more of trying to teach the kids the same set of skills -- this is 6th grade.) One guy would basically going mid-post to mid-post. The other guys would still cut through after a pass and fill spots, but I'd add a rule that if you can't pass to the guy in the post, they should reverse the ball as quickly as possible.

If I did this, I don't know where to have the guy passer exit though after the pass to the mid-post. The ball side baseline would be open, but we'd end up just rotating the corner and the wing on the ball side. They could exit on the weak side short corner and we could look to reverse the ball to them.

I don't know. I hate to abandon the cutters so quickly. I'm just having trouble envisioning it working against the zone. Maybe just having them cut to the mid-post could have the same effect but it seems like it takes to long to reverse the ball with each player looking for the cutter before passing. I don't see us making that pass to the mid-post since the defense will overreact and collapse on the cutter, but this will leave the weak side open.

Thanks for listening :-)


 Profile  
 
PostPosted: 10 Jan 2010, 12:13 
User avatar

Posts: 3139
As for using the short corners... their is a few options...

1- a shot / shot fake and take it to the hole
2- passing to someone from the high post diving to the basket - we would get this several times a game.
3- opposite diagonal... the elbow or opposite wing depending on the rotations the D uses. This we found to be open a lot.
4- kick it out to the near wing if they double team you from there

These are things we did utilizing the short corners... and remember, every time you get the ball inside the D has to adjust and sink which should allow you to get a better look from the perimter.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: